Coastal Living Paint and Hardware
82 Lafayette Rd, Hampton Falls, NH 03844 603-926-7777

Benjamin Moore Interior and Exterior Primers

Fresh Start All Purpose 100% Acrylic Primer 

A premium quality, 100% acrylic interior and exterior primer formulated for sealing and suppressing most bleeding type stains: including crayon, graffiti, grease marks, water stains; cedar and redwood bleed; asphalt, creosote, rust and smoke*. 

Fresh Start All Purpose 100% Acrylic Primer combines many of the qualities desired in a primer: high hiding, excellent adhesion (even over chalky surfaces), blister resistance, quick dry, spatterproof and minimal odor with excellent flow and leveling.

  • Provides a total latex system, offering excellent resistance to blistering on new construction.
  • Easy to apply.
  • Excellent hiding and leveling properties.
  • Excellent adhesion even over chalky surfaces.
  • Quick dry.
  • Spatter resistant.
  • Minimal odor.
  • Apply with Nylon/Polyester Brush or High Capacity Roller
  • Water cleanup
Recommended for both interior and exterior surfaces.

Interior Surfaces: New or Previously Painted Wood, Plywood, Drywall, Ceiling Tile, Formica®, Masonite®, Ceramic Tile and Cured Plaster. Fresh Start All-Purpose 100% Acrylic Primer is an excellent sealer and primer for use under new wallcoverings and can also be used as a primer coat over existing wallcoverings.

Exterior Surfaces: New or Previously Painted Wood, Aluminum and Hardboard Siding, Shingles, Shakes, Concrete, Masonry, Brick and Metal Surfaces.

*In cases of severe bleeding, a solvent based primer should be used to prevent stains from reappearing. 
 

Fresh Start All Purpose Alkyd Primer

A premium quality alkyd primer for use as an undercoater, sealer or stain blocking primer. Formulated for suppressing most bleeding type stains including crayon, graffiti, grease marks, water stains, cedar and redwood bleed, asphalt, creosote, rust stains, and smoke. This all purpose primer can be used over oil or latex paint and performs equally well under all Benjamin Moore & Co. architectural finish coat products.
  • Blister resistant
  • High hiding
  • Excellent adhesion
  • Quick dry
  • Enamel holdout
  • Sandable
  • Apply with Black China Bristle Brush or Shed Resistant Roller
  • Cleans up with Mineral Spirits

Interior: Use on previously painted surfaces or as an undercoater or sealer on wood, plywood, ceiling tile, Formica®, Masonite®, ceramic tile, and cured plaster. Excellent as a sealer and primer under new wallcoverings and can also be used as a primer coat over existing wallcoverings.

Exterior: Use on new or previously painted wood, aluminum, hardboard and vinyl siding, shingles, shakes, cured concrete, masonry, brick, and ferrous metal surfaces. 

 

Fresh Start Fast Dry Alkyd Primer

A premium quality exterior alkyd pigmented primer.

  • Blocks tannin bleed on redwood and cedar
  • Use under paint or stain
  • Provides a uniform surface over which the finish stain or paint performs to best advantage
  • Apply with Black China Bristle Brush or Shed Resistant Roller
  • Cleans up with Mineral Spirits

     

Fresh Start Fast Penetrating Alkyd Primer

A premium quality long-oil, alkyd-based fast drying pigmented primer which provides a uniformly sealed surface that prevents absorption of vehicle from finish coat. It provides excellent hiding and leveling properties, and improves adhesion on weathered and prepared chalky surfaces.

  • Easy to apply by brush, roller, or spray gun
  • Excellent hiding and leveling properties
  • Improves adhesion on weathered and prepared chalky surfaces
  • Apply with Black China Bristle Brush or Shed Resistant Roller
  • Cleans up with Mineral Spirits








        

Natura Primer

Natura Interior Waterborne Primer (511) is a low odor, zero-VOC, 100% acrylic interior latex primer/sealer with spatter-resistant properties. Ideally suited for residential applications, the Natura Primer does not have the odor of conventional primers, which contain ingredients such as Volatile Organic Compounds (VOCs). Always use Natura Interior Waterborne Primer (511) as a first coat when a low-odor, VOC-free primer/finish system is required.

  • Virtually odorless
  • Zero VOC’s
  • Quick return to service
  • 100% Acrylic
  • Spatter-resistant
  • Exhibits excellent holdout properties
  • Carries the Green Promise designation.
  Exterior Stain Alkyd Primer


A premium quality exterior wood alkyd primer.
Features
  • Excellent for blocking tannins in extractive woods like redwood and cedar 
  • Provides a uniform surface over which the finish, stain, or paint performs to best advantage
  • Excellent holdout and hiding properties
  • Seals uniformly 
  • Seals porous surfaces and improves the bond over prepared chalky surfaces
  • Exhibits excellent adhesion characteristics
  • Effective for blocking stains
It is recommended for residential or commercial applications where a premium-quality finish is desired. For exterior priming of new or previously coated wood, under light color stains, and where cedar and redwood bleeding may be a problem.

 

STIX Waterborne Bonding Primer  is a premium quality, water based, uerthane acrylic primer-sealer with unparalleled adhesion to the most challenging surfaces, including PVC, vinyl, plastic, glass, tile glazed block, glossy paints, precoated siding, fiberglass, galvanized metals.

Please do a small test on plastic surfaces for adhesion prior to the entire job. It dries in temperatures as low as 35 F and presents an extremely hard film when cured.
Use it on interior or exterior surfaces and topcoat with almost any product including alkyd, latex, urethane, epoxy and lacquer coatings.
STIX is a low odor, low VOC primer which levels out to a smooth surface and cleans up with soap and water.

STIX is not recommended where continuous water contact is common or for below grade applications. It is not recommended for polyethylene or polyproylene. Bonds to hard to coat surfaces Use on all surfaces where adhesion is a problem.
Interior / Exterior
Website Builder